CE-marked one-way mouthpiece with bacteria and virus filter, suitable for all FAN H₂ breath test devices.
Recommended mouthpiece that withholds micro organisms that maybe exhaled or inhaled during the test as far as possible, and thus significantly protects patients, staff and instrument inside from contamination.

Disinfection wipes without alcohol, suitable for all alle FAN H₂ breath test devices.
Enable you to clean and disinfect the device shell without polluting the sensor.
Product information • Material Safety Data Sheet

12 litres calibration gas (100 ppm H₂ in synthetic breath) for all FAN H₂ breath test devices.
Compressed in an 1-litre aluminium can, at least 14 calibrations can be readily achieved.
Safety data sheet

12 litres test gas (20 ppm H₂ in synthetic breath) for all FAN H₂ breath test devices.
Compressed in an 1-litre aluminium can, about 30 tests can be performed.
Safety data sheet
How-To • How-To for LactoFAN and MicroH2 • Quality Assurance Checklist

Flow control valve with manometer and flow indicator for use with calibration gas cylinder.
It is equipped with a manometer indicating the bottle pressure remaining.
Flow rate: 0.25 litres/min (lower marking) to 1.0 litres/min (upper marking).

A nose clip to avoid breath loss through the nose during sampling.

A slow blow through the das H₂ monitor is sufficient for a measurement with adults and children from three years on.
For special purposes a gas sampling system is available. This system collects expired air remotely for a subsequent manual analysis with the breat test device.

Instructions for use

Assimilation/output-bag for gas sampling system

Sample bags for gas sample system

Breathing masks

T-pieces for connecting masks to the gas sampling system (both needed; see IFU gas samplin system above)

Bacteria and virus filter