Tags:

    Filter mouthpiece
    LF2-AC-01
    (unit = 50 pcs.)
    CE-marked one–way mouthpiece with bacteria and virus filter, suitable for all FAN H2 breath test devices.
    Recommended mouthpiece that withholds micro organisms that maybe exhaled or inhaled during the test as far as possible, and thus significantly protects patients, staff and instrument inside from contamination.
    Alcohol-free Disinfection wipes
    HC-Des-1
    Disinfection wipes without alcohol, suitable for all alle FAN H2 breath test devices.
    Enable you to clean and disinfect the device shell without polluting the sensor.
    Material safety data sheet
    Refill pack disinfection wipes
    HC-Des-4
    (unit = 4* 50 pcs.)
    Refill disinfection wipes without alcohol.
    H2 calibration gas
    HV-Lacto-CG
    12 litres calibration gas (100 ppm H2 in synthetic breath) for all FAN H2 breath test devices.
    Compressed in an 1–litre aluminium can, at least 14 calibrations can be readily achieved.
    Safety data sheet
    H2 calibration gas
    HV-Lacto-TG
    12 litres test gas (20 ppm H2 in synthetic breath) for all FAN H2 breath test devices.
    Compressed in an 1–litre aluminium can, about 30 tests can be performed.
    How-To for LactoFAN2 with firmware versions lower than 2.26
    How-To for LactoFAN and MicroH2
    Quality Assurance Checklist
    Control valve with pressure gauge
    HZ-CV-S
    Flow control valve with manometer and flow indicator for use with calibration gas cylinder.
    It is equipped with a manometer indicating the bottle pressure remaining.
    Flow rate: 0.25 litres/min (lower marking) to 1.0 litres/min (upper marking).
    HZ-NK
    A Nose clip avoids breath loss through the nose during sampling.
    Gas sampling system
    HZ-GAMU
    The gas sampling system is designed for applications where it is not possible to perform a measurement by a straightforward single breath manoeuvre. The bag is filled with expired air remotely by using a one-way valve and breath system and face mask. Once full, the bag is connected to the LactoFAN and the breath sample expelled manually.
    Gas sampling system with mouthpiece Gas sampling system with mask Measurement using gas sampling system

    Instructions for use
    assimilation/output-bag
    HV-GM-A1
    assimilation/output-bag for gas sampling system
    sample bag
    HV-GM-S10
    (unit = 10 pcs.)
    sample bags for gas sample system
    Breath masks
    F201-VP-08
    F201-VP-09
    F201-VP-10
    Breathing mask for Baby
    Breathing mask, medium
    Breathing mask, large
    Y connector
    HZ-YPM

    HZ-VMG

    Y–port for breathing masks

    connector Y–port ↔ gas sampling system

    Bacteria and virus filter
    HZ-BVF
    Bacteria and virus filter

     

    Company

    Address

    Customer No.

    Editor

    Phone

    E-Mail Address

    Remarks


    FAX order form